Motorcycle Tire | Ice Resurfacer Studs Model 1400

Motorcycle Tire | Ice Resurfacer Studs Model 1400 100 W/TOOL

Motorcycle Tire | Ice Resurfacer Studs Model 1400 150 W/TOOL

Motorcycle Tire | Ice Resurfacer Studs Model 1400 1000

Motorcycle Tire | Ice Resurfacer Studs Model 1400

Pack Of 100 W/TOOL 150 W/TOOL 1000

Price

Save $-138.88

/

Quantity

Installation tool required

Have questions? Call us at 855-538-7883

What is Grip Studs® Model 1400 (Ice Resurfacer & Motorcycle Tire Studs)?

Model 1400 is a screw-in traction stud built with a solid tungsten carbide core and patented wide-auger threads. It's designed to re-stud worn ice resurfacer machine tires instead of replacing them outright, and also fits motorcycle and off-road vehicle tires that need reliable traction on ice, snow, and frozen surfaces.

How do they stay secure in the tire?

The wide-auger thread bites into the rubber to increase surface contact and holding power, keeping the studs in place under load without glue or adhesives.

What types of tires can they be used on?

Model 1400 works with:
• Ice resurfacer machine tires
• Street motorcycle tires and dual-sport rear tires
• Off-road pickup, Jeep, and truck tires
• Forklift tires (outdoor use only - loading docks, parking lots, and outdoor yards)

How many studs should I install?

Motorcycle tires: 100–150 studs per tire
Vehicle tires: 50–75 studs per tire
Ice resurfacer machine tires: 50–75 studs per tire

Why choose the Model 1400?

Re-studding an ice resurfacer's existing tread costs less than buying new pre-studded tires, and keeps usable rubber in service longer. With a 2.8 mm prominence and 13.5 mm penetration, Model 1400 holds traction on iced roads, packed snow, and frozen ground across both machine and vehicle tires.

Installation notes

Easy installation with a variable-speed drill; no pre-drilling required. Do not use impact tools.
• 100 and 150 packs include an installation tool (#4500)
• 1000-count bulk boxes do not include an installation tool; tool can be purchased separately

Important information

• Check with your State Department of Transportation for stud regulations.
• Studs may damage hard surfaces if used improperly
• Install recommended quantities to avoid tire damage

Give us a call if you need any support or have any questions about your application. 855-538-7883

Technical Info:

Application: Off-road Pickups & Jeeps, Street Motorcycles, Trucks, Fork Lifts, Ice Re-surfacers, Dual-sport Rear Tires

Dimensions: 9 x 16.3 mm

Prominence (from tire or tread surface): 2.8 mm

Stud Penetration (into tire or tread surface): 13.5 mm

Minimum Tread Depth: 11 mm

Carbide Tip Width: 2.6 mm

Corresponding Tool: #4500 for Installation & Removal

Wide-Auger Threads

Patented wide-auger threads allow more surface area to contact the rubber, increasing retention and preventing movement further into or out of the rubber. No glue necessary.

Tungsten Carbide

Solid tungsten carbide core ensures strength and durability.

Made in Italy

A fine product manufactured by Bestgrip in Northern Italy.

US Patent 7552550

Canadian Patent 2533093

Easy Installation

Installation tools fit into variable-speed drills, allowing easy installation and removal. No complicated stud gun, pre-drilled holes, or glue required. Manual driver and handle tools available for manual installation in boots, bicycles, etc. Note: Do not install Grip Studs® with impact tools; use variable speed drills only. Installation Guide

Variety of Stud Sizes

Grip Studs® varied thread depths and tip lengths fit a wide range of tires, tracks, and footwear applications requiring traction on ice, snow, mud, ocean vegetation or frozen pavement

Shop by Category or Specific Stud

We make choosing the right stud simple - you can either shop by category from the toolbar categories at the top of the page, or shop by specific stud from the Stud Selection Guide. Still have questions? Give us a call toll-free at 855-538-7883 or 541-476-1928.

NOTE: Shipping transit times are based upon same-day shipping on orders placed before 12:30pm. Add one business day on orders placed after 12:30pm. FedEx shipments are delivered on business days only.

WARNING Canadian Orders: Our prices do NOT include Canadian taxes or Customs clearance/duty fees. The carrier will bill and collect those charges after your order clears the border. If you have a Customs broker, please enter its name and phone number in the Special Instructions box below.

EXPEDITED CANADIAN CARRIER OPTIONS: If you cannot receive Postal shipments at your locations or need an expedited service, please contact Customer Service at 855-538-7883 for alternate shipping options.

Required Installation Tool

Tool #4500 / Zinc

Fits into cordless drills for easy installation and removal of Grip Studs.® Do not use tool with impact drivers.

Step 1:

Select Studs! You can also refer to our Stud Selection Guide to help aid in your selection.

Step 2:

Select Tools! Select the corresponding installation and removal tool specified on the product page.

Step 3:

Submit Order! Studs ship out same day if ordered before 12:30p.m. PST, Mon-Fri excepting holidays.